Essential FAQs for Efficient Washing Machine Repair Services

A washing machine could stop draining water properly because its drain hose or filter are clogged, or due to a faulty drain pump. Clean the hose and filter well, and make sure to do so regularly to prevent blockages. The drain pump would most likely require the attention of a repair specialist, whether to replace it or fix it.

Articles

• Washing Machine not Draining

Unbalanced loads, loose parts, or worn bearings could all lead to excessive vibration or noise. Check if the washing machine is levelled well, and adjust its legs, if necessary. Redistribute the load, and check for loose components – the latter would require help from a repair technician.

Water leaks can be caused by damaged or clogged hoses, a worn out or damaged door seal, or too much detergent being used. Check hoses and seals, and use the correct amount of detergent – when more than recommended, the suds/foam it creates could block the overflow tube.

A bad smell is usually caused by mould growth in the drum, door seal, hoses and filters, detergent residue buildup, or dirty filters and hoses. Regular cleaning of the drum, filter, and door seal can help prevent unpleasant odours. Make sure to regularly deep clean your appliance regularly to avoid unpleasant odours.

Articles

• Why Does My Washing Machine Smell?
• How to Remove Mould from Washing Machine

Washing machine not filling with sufficient amount of water could be due to clogged inlet hoses, a faulty water inlet valve, or low water pressure. Check the hoses and valve for any blockage, and clean them well. If you constantly have a low water pressure at home, consult a plumber to find a solution.

The washing machine door will remain locked if there’s still water in the drum, the door lock mechanism is overheated, or the lock is faulty. Try draining any remaining water using the drain function, or manually. When the lock cools down, try to open the door. A faulty lock needs replacement, the draining issue - professional assistance.

Clothes are coming out too wet if the washing machine isn’t spinning properly. Reasons include unbalanced load that prevents effective spinning, slower spin cycle, or clogged filters preventing water drainage. Try evening out the load, choose a higher spin cycle if appropriate, and clean any clogged filters.

A washing machine could stop mid-cycle for several reasons. These could be a blocked drain that prevents water from draining, a faulty control board interrupting the cycle, or an unbalanced load preventing spinning. Clear any drain blockages, check for error codes on the control panel, and redistribute the load.

Clicking or grinding sounds can come from foreign objects in the drum, worn or damaged bearings, or a loose drive belt. Check the drum and remove loose coins, buttons, or other small items that might be responsible for the noise. For the bearing or the belt, you may need help from a professional.

The washing machine will not spin due to several reasons - unbalanced load, faulty motor, clogged drain pump, or malfunctioning lid switch. Other potential reasons could be a broken drive belt or an issue with the control board. Check and redistribute the washing, and clean the drain pump. For the rest, contact a professional technician who can find out what the problem is.

Articles

• Washing Machine Not Spinning

Error codes indicate specific issues like drainage problems, door lock issues, or sensor malfunctions. Read the manufacturers manual to find out what particular problem the error code is for, and try to fix the issue by following the instructions in the booklet. Sometimes the problem could be resolved simply by restarting the washing machine.

If your washing machine takes too long to finish a load, first check what program it’s been set on – you might’ve not realised that particular cycles take longer than expected. Other potential reasons could be unbalanced load or overloading, low water pressure, or sensor issues. Redistribute the washing, if this is the problem, and try to not overload the machine.

If your washing machine’s drum won’t turn, it could be down to a few reasons – the appliance is overloaded, a broken drive belt, or a faulty motor. Make sure to always load the washing machine with the recommended weight of clothes, or less. By overloading it, first the garments don’t get washed as well as they should, and this also puts pressure on the drive belt and the motor.

A washing machine that overfills with water might have a malfunctioning water level switch, a clogged or disconnected pressure hose, or a faulty inlet valve. Electrical glitches in the control board could also be a reason for overfilling. Call a professional repair technician to check your appliance to avoid potential damages.

If at the end of each wash detergent still remains in the drawer, this could be down to a few reasons – either the detergent drawer is clogged, the water pressure is law and the detergent is not absorbed, or too much detergent is being used. Take out and clean the drawer, and make sure to use the appropriate amount of detergent. Check the water flow.

If your washing machine is shaking when spinning, it could be because of unbalanced load, uneven floor or the appliance not being installed properly, or the shock absorbers have worn out. Redistribute the washing, and check if the machine’s levelling. Call a professional repairman to inspect he shock absorbers.

Deciding whether it's worth fixing your washing machine depends on its age, repair costs, and frequency of breakdowns. Newer machines are less prone to breakages and worth saving, whereas replacing older models is often more cost-effective.

Articles

• Is It Worth Repairing Your Washing Machine?